Crate KXB50

Crate KXB50 Crate KXB50 Description: New for 2005, the Crate keyboard amp line is the ultimate in keyboard amplification in powerful, great sounding packages. All Crate keyboard amps feature multi- channel inputs, and high quality woofer and tweeters. The cabinet designs are useful for traditional, vertical use, or can be placed in a studio monitor position for enhanced projection. The Ozite covering and steel grille provide protection for the components, and the foam insert behind the grille give the face of the unit a sophisticated, finished look. Front Panel: 1. INPUT 1: Use this 1/4" jack to connect your keyboard or other line level signal to the amplifier by means of a shielded instrument cable. The signal level at this jack is controlled by the Level 1 knob (#3). 2. INPUT 2: Use this 1/4" jack to connect your keyboard or other line level signal to the amplifier by means of a shielded instrument cable. The signal level at this jack is controlled by the Level 2 knob (#4). 3. LEVEL 1: Use this control to adjust the level of the signal connected to the Input 1 jack (#1). 4. LEVEL 2: Use this control to adjust the level of the signal connected to the Input 2 jack (#2). 5. PEAK: This LED illuminates when the input signal level nears clipping. For the best signal to noise ratio, adjust the Level controls until this LED flashes on strong signal peaks. 6. LOW: Use this control to adjust the bass response of the amplifier. Rotating the control counterclockwise reduces the low frequency output. Rotating the control clockwise increases the low frequency output. 7. LO MID: Use this control to adjust the "thickness" or "fatness" of the amplifier. Rotating the control counterclockwise reduces the lower midrange frequency output. Rotating the control clockwise increases the lower midrange frequency output. 8. HI MID: Use this control to adjust the clarity and definition of the amplifier. Rotating the control counterclockwise reduces the upper midrange frequency output. Rotating the control clockwise increases the upper midrange frequency output. 9. HIGH: Use this control to adjust the high frequency response of the amplifier. Rotating the control counterclockwise reduces the high frequency output. Rotating the control clockwise increases the high frequency output. 10. REVERB: Use this control to adjust the amount of reverberation added to the signal. With the control fully counter clockwise, the signal is dry - no reverb added. As you rotate the control clockwise the amount of reverb added increases. 11. LEVEL: Use this control to adjust the overall output signal of the amplifier. 12. LIMIT: The KXB50 employs an internal limiter circuit to help prevent overdriving the output signal. This LED illuminates when the limiter circuit is activated. During normal playing conditions, this LED will flash occasionally. If this LED remains illuminated, reduce the level controls. 13. CD INPUT: Use these RCA jacks to connect the output from a CD player or tape deck to t